Hard Surfaces (Engine bay, trims, and plastics):
- Decant into a spray bottle.
- Spray onto a cloth or directly onto the surface.
- Agitate with a suitable detailing brush if deeper cleaning is required.
- Buff with a clean microfiber cloth for a uniform finish.
- For sensitive finishes, wipe with a damp cloth afterwards and dry with a soft cloth.
Soft Surfaces (upholstery, carpets):
- Spray directly onto material.
- Work in with a soft brush or colour-fast cloth.
- Avoid creating tide marks.
- Re-wet with clean water and a damp sponge, if finish is inconsistent, then reapply as required.
Wet Vac Use:
- Add product to the clean water chamber at a dilution of 1:50-1:200 depending on cleaning intensity required.
Usage Notes:
- Always test on an inconspicuous area before full application.
- Do not allow product to dry on surfaces without buffing.
Mixing Table
Dilution Ratio | Application
Neat | Maximum cleaning power – spot removal of stubborn contaminants
1:5 | Heavy exterior soiling / engine bay cleaning
1:10 | Economy cleaning for exterior and general interior hard/soft surfaces
1:30 | Interior cleaning of delicate or sensitive finishes
1:50–1:200 | Wet vacuum water chamber dosing