Würth Seal Flex Sealant (Grey)
Würth Seal Flex Sealant (Grey)
24 in stock
Key Features
- Specialist roof sealant for flat and sloped roof areas, including highly stressed joints.
- Excellent adhesion to bitumen strips and a wide range of building materials.
- Can be applied to damp substrates and largely unaffected by weather conditions during application.
- Versatile use - ideal for emergency repairs, expansion joints, and connection joints.
- Tested suitability with polycarbonate glass and UV resistance (Fraunhofer Institute, Bremen).
- Permanently elastic, silicone-free, paintable, with excellent resistance to ageing and weather.
- Odourless once cured for safe use in various environments.
Couldn't load pickup availability
Share
Description
Reliable Sealing in Roof Applications
Würth Seal Flex Sealant is a synthetic rubber-based sealant developed for use in sloped and flat roof areas. With its excellent adhesion to bitumen strips, concrete, wood, metal, glass, and many plastics, it provides a robust and flexible sealing solution for heavily loaded joints and exposed environments.
Durability and Weather Resistance
The formulation is UV-resistant, permanently elastic and resistant to ageing and weathering, ensuring long-term performance in harsh outdoor conditions. Its ability to bond to damp surfaces makes it a dependable choice for on-site work where weather cannot always be controlled.
Tested and Proven Performance
The sealant has been tested for UV stability and compatibility with polycarbonate glass by the German Fraunhofer Institute, confirming its suitability in demanding building and roofing applications.
Versatile and Easy to Apply
Suitable for emergency repairs as well as planned installations, Seal Flex provides a quick and reliable seal even in difficult conditions. The product is paintable, allowing integration into building finishes, and once cured, it becomes odourless for added user comfort.
More Information
Application Instructions
- Ensure contact surfaces are clean, firm, and free of loose debris.
- Store cartridge at room temperature before application for best results.
- Backfill joints with polyethylene cords in accordance with DIN 18540 to prevent three-edge adhesion.
- Porous surfaces should be dry; smooth surfaces may be slightly damp.
- Apply sealant evenly into the joint.
- If masking tape is used for clean edges, remove it immediately after grouting or smoothing.
- Allow to cure fully before subjecting joints to heavy loads or prolonged water exposure.
Usage Notes
- Adhesion may be reduced in standing water applications.
- Not suitable for sealing glass or for use with pre-compressed sealing tapes.
- Not intended for adhesive bonding or cavity filling.
- Always test compatibility before use on alkyd resin paints, powder-coated aluminium, or sensitive coatings.
- Transparent variant may appear milky when wet, but dries back to clear.
- Ensure adequate ventilation during curing; curing time increases with greater layer thickness.
Specifications
Chemical Basis: Synthetic rubber
Colour: Grey (other variants may be available)
Container: 310 ml cartridge
Density: 0.94 g/cm³
Fragrance: Characteristic
Continuous Motion Absorption: 25 %
Shore A Hardness: 25
Skin Formation Time: 3–8 minutes (23 °C, 50% RH)
Curing Speed: 1–3 mm/day (23 °C, 50% RH)
Fungicidal Properties: No
Temperature Resistance: -25 °C to +100 °C
Processing Temperature: +5 °C to +40 °C
Resistance: Ageing and weather
Silicone-Free: Yes
Building Standards: In accordance with DIN 18540 (backfilling requirement)
Shelf Life: 24 months from production (store in a cool, dry place)