Würth P30 Plus Anti-Hologram Polish is a professional-grade finishing compound designed for eliminating streaks, swirl marks, and holograms from painted surfaces. Its unique abrasive system ensures fine defect removal while simultaneously achieving a deep, reflective gloss, making it especially suitable for dark paints where imperfections are most visible.
Optimised Abrasive Technology
Formulated with a special aluminium oxide powder blend, P30 Plus gently removes sanding grooves from P3000 grit upwards while refining the surface. The abrasives break down consistently during polishing, ensuring a controlled cut with minimal risk of micro-scratching or haze formation.
Thick, Low-Dust Composition
The polish features a viscous consistency that stays on the working surface, reducing product waste and preventing splatter. The low-dust formulation enhances efficiency by minimising clean-up requirements and providing a smooth polishing workflow.
Versatile Professional Application
P30 Plus can be applied manually or with a polishing machine. It is suitable for a wide range of coatings including solvent-based paints, water-based systems, powder coatings, and scratch-resistant clear lacquers. This versatility makes it ideal for use in automotive refinishing, marine applications, and wood finishing.
Notice:
Not suitable for matte paints.
Do not mix with other polishes or solvents, as this may result in micro-scratches and void warranty.
Store in original sealed containers at 15-25°C. Protect from frost and direct sunlight. Shelf life: 24 months.
More Information
Application Instructions
Manual Application
Shake bottle well before use.
Apply an even coat of polish to the surface with a soft polishing cloth or sponge.
Work the polish in circular motions until streaks and holograms are removed.
Wipe off residues with a clean microfiber cloth.
Machine Application
Moisten the selected orange or lambskin pad evenly with P30 Plus.
Apply a small amount of polish directly to the surface.
Place the pad flat on the area and begine polishing with light to moderate pressure.
Continue polishing until holograms and fine sanding marks are removed.
Remove residual polish with a clean microfiber cloth for a high-gloss finish.
Safety Notes:
Product is safe when used as intended.
Avoid prolonged skin and eye contact.
Keep out of reach of children.
Do not allow polish to dry on the surface.
Specifications
Weight of Content: 1 kg
Chemical Basis: Water, hydrocarbon
Smell/Fragrance: Characteristic
Colour: Light grey (bright grey)
Density: 0.99 g/cm³
Shelf Life: 24 months (at room temperature, protected from frost/sunlight)
Silicone-Free: Yes
Documents
Choosing a selection results in a full page refresh.