1 1

Würth

Würth P20 Plus High-Gloss Polish

Würth P20 Plus High-Gloss Polish

Key Features

  • Medium-abrasive high-gloss polish designed for efficient paint preparation and defect removal.
  • Formulated with aluminium oxide powder abrasives for controlled cutting performance and outstanding gloss levels.
  • Removes sanding grooves from P2000 grit upwards, as well as scratches and traces of grinding on used paints.
  • Thick, low-dust formula prevents splashing, reduces clean-up, and ensures economical consumption.
  • Can be applied manually or with a machine (1500-2000 rpm).
  • Compatible with conventional and scratch-resistant paints including solvent-based, water-based, and powder systems.
  • Silicone-free, bodyshop safe, and suitable for both new and used vehicle paintwork.
Size

24 in stock

£45.99 GBP
£45.99 GBP
Sale Sold out
Tax included.
View full details

Description

Medium-Cut Correction with High-Gloss Finish

Würth P20 Plus High-Gloss Polish is a medium-abrasive finishing compound engineered for professional paintwork preparation. It delivers a balanced performance, combining moderate cutting power with a very high gloss level, making it ideal for correcting sanding grooves, scratches, and surface defects on both fresh and fully hardened paint.

Advanced Aluminium Oxide Abrasives

The specifically tailored aluminium oxide powder composition ensures a uniform, controlled removal rate. With the ability to remove P2000 sanding marks and finer defects, it refines surfaces quickly and leaves behind a gloss-rich finish suitable for subsequent protection or final polishing steps.

Low-Dust, Easy-to-Use Formula

Thanks to its highly viscous consistency, P20 Plus does not splash during application, generates minimal dust, and prevents unnecessary re-cleaning of surrounding areas. This makes it an economical choice for workshops seeking efficiency and consistent results.

Versatile Application Range

The polish can be applied by hand or machine and is suitable for a wide range of painted surfaces, including:

  • Solvent-based paints (1K and 2K systems).
  • Water-based coatings.
  • Powder paints.
  • Scratch-resistant clear lacquers.


This versatility allows it to be used across the automotive, marine, and wood finishing industries, particularly in paint preparation, refurbishment of used vehicles, and defect correction on repair coatings.

Notice:

  • Not suitable for matte finishes.
  • Do not mix with other polishes or solvents, as this may compromise results and void warranty.
  • Store in original containers between 15-25°C. Protect from frost and direct sunlight. Shelf life: 24 months.

Technical Information

Specifications

Weight of Content: 1 kg

Chemical Basis: Water, hydrocarbon

Smell/Fragrance: Characteristic

Colour: Light yellow

Density: 1.02 g/cm³

Shelf Life: 24 months (15–25°C, sealed container, protected from frost/sunlight)

Silicone-Free: Yes

Documents

Application Instructions

Machine Application

  1. Shake the container well before use.
  2. Moisten the polishing pad evenly with the compound.
  3. Apply a small amount of P20 Plus directly to the surface.
  4. Place the pad flat on the work area and begin polishing.
  5. Work with moderate pressure at 1500-2000 rpm, processing in sections until all sanding marks and imperfections are removed.
  6. Remove any residual polish with a clean microfiber cloth.

Manual Application

  1. Apply a small amount to a polishing sponge or cloth.
  2. Work in circular motions with moderate pressure until defects are removed.
  3. Wipe off residues with a microfiber cloth.

Safety Notes:

  • Safe when used as intended.
  • Avoid eye and prolonged skin contact.
  • Keep out of reach of children.
  • Do not allow polish to dry on the surface.