Würth MS Adhesive and Sealant

Universal, durable, elastic, 1-component, MS polymer-based adhesive and sealant.

Very good adhesion to almost all surfaces such as plain, zinc-plated, primed or varnished sheet steel, aluminium, stainless steel, copper, plastic, ABS, hard PVC, concrete, wood, glass etc.

• Moisture-curing
• Good levelling properties
• When freshly applied, can be painted over with almost all varnish types commonly used in the trade (please test it yourself beforehand)
• Bonded sheeting can be spot welded
• Solvent-free
• Isocyanate- and silicone-free
• Weatherproof

Notice

Not suitable for polyethylene, polypropylene, silicones, PTFE (Teflon®) or soft plastics.

Contents

310 ml

Chemical basis

MS hybrid polymer

Colour

White

Density

1.55 g/cm³

Smell/fragrance

Characteristic

Min. skin-formation time

10 min

Min./max. processing temperature

5 to 40 °C

Min./max. temperature resistance

-40 to 90 °C

Silicone-free

Yes

Product weight (per item)

550.958 g

• Safety Data Sheet

Application area

Ideal for elastic adhesive bonding in the construction, metal/automotive industry, mechanical engineering, shipbuilding etc.

Instructions

The surfaces must be clean, dry and free from dust and grease.

For best results, we recommend using primer. Apply the primer in a thin layer, according to the surface, on the cleaned, grease-free and dry adhesion surfaces.

Before applying the sealant, the primer must have evaporated. Please observe the specified drying times.

Most primers contain flammable solvents and are moisture-sensitive. It is therefore advisable to close the container immediately after use.

Tip: The material should be primed or varnished over the top within 2 hours, otherwise there is a risk of adhesion problems.