Würth
Würth Adhesive and Sealant MS
Würth Adhesive and Sealant MS
Low stock: 1 left
Key Features
- Moisture-curing.
- Good levelling properties.
- When freshly applied, it can be painted over with almost all varnish types commonly used in the trade.
- Bonded sheeting can be spot welded.
- Solvent free.
- Isocyanate and silicone free.
- Weatherproof.
Share
Product Information
Detailed Product Information
Universal, durable, elastic, 1-component, MS polymer-based adhesive and sealantVery good adhesion to almost all surfaces such as plain, zinc-plated, primed or varnished sheet steel, aluminium, stainless steel, copper, plastic, ABS, hard PVC, concrete, wood, glass etc.
- Moisture-curing
- Good levelling properties
- When freshly applied, can be painted over with almost all varnish types commonly used in the trade (please test it yourself beforehand)
- Bonded sheeting can be spot welded
- Solvent-free
- Isocyanate- and silicone-free
- Weatherproof
Notice
Not suitable for polyethylene, polypropylene, silicones, PTFE (Teflon®) or soft plastics.
Specifications
Contents
310 ml
Chemical basis
MS hybrid polymer
Colour
White
Density
1.55 g/cm³
Smell/fragrance
Characteristic
Min. skin-formation time
10 min
Min./max. processing temperature
5 to 40 °C
Min./max. temperature resistance
-40 to 90 °C
Silicone-free
Yes
Product weight (per item)
550.958 g
Documents
Application Instructions
Ideal for elastic adhesive bonding in the construction, metal/automotive industry, mechanical engineering, shipbuilding etc.
The surfaces must be clean, dry and free from dust and grease. For best results, we recommend using primer. Apply the primer in a thin layer, according to the surface, on the cleaned, grease-free and dry adhesion surfaces. Before applying the sealant, the primer must have evaporated. Please observe the specified drying times.
Most primers contain flammable solvents and are moisture-sensitive. It is therefore advisable to close the container immediately after use. Tip: The material should be primed or varnished over the top within 2 hours, otherwise there is a risk of adhesion problems.