Würth AdGrip Multistick Panel Adhesive (Beige)
Würth AdGrip Multistick Panel Adhesive (Beige)
24 in stock
Key Features
- High-quality, one-part gunable SBR (synthetic butyl rubber) adhesive for permanent bonding.
- Versatile bonding - suitable for panels, battens, insulation products, carpets, gripper rods, and most construction materials.
- Excellent bonding strength with gap-filling properties.
- Enables fast panel construction without nails, screws, or fixing strips.
- High slump resistance, maintaining bond integrity on vertical surfaces.
- Ideal for both light and heavy materials in interior construction and finishing.
Couldn't load pickup availability
Share
Description
Permanent Bonding for Construction and Finishing
Würth AdGrip Multistick Panel Adhesive is a gun-grade SBR-based construction adhesive designed for fast, clean, and reliable bonding of a wide range of building materials. It provides strong adhesion from first contact, enabling efficient installation without the need for mechanical fixings such as nails or screws.
Gap-Filling and Slump Resistant
With its high-body formulation, the adhesive offers excellent gap-filling properties, making it suitable for uneven surfaces. Its slump resistance ensures that bonded materials remain securely in place even when applied vertically or overhead.
Versatile Applications
Suitable for:
- Panel and batten bonding.
- Insulation board installation.
- Carpet and gripper rod fixing.
- General construction bonding to most substrates.
The adhesive bonds to most common building surfaces including wood, concrete, plaster, brick, stone, and metal.
Fast and Reliable Application
The product enables quick panel construction without secondary fixings, saving time on site. Light materials can be pressed into place immediately while heavier or bowed materials can be bonded using the press-break-hinge method, ensuring maximum contact and adhesion.
Safety and Handling
This solvent-based adhesive should only be used in well-ventilated areas. Appropriate PPE (neoprene/nitrile gloves, goggles, protective clothing) must be worn. It must be stored securely away from heat and ignition sources.
More Information
Application Instructions
- Condition adhesive and materials to 15-20°C before application.
- Ensure all surfaces are clean, dust-free, and grease-free.
- Cut the cartridge nozzle to the desired bead size (3-6 mm diameter) and pierce the inner seal.
- Apply adhesive in lines at approx. 30cm centres to the bonding surface.
- For light panels: press directly into place and leave to set.
- For heavy or bowed panels, press firmly into adhesive, break the bond and hinge the panel away. Allow 10-20 minutes drying time, reapply panel and press firmly with a mallet or block for a strong bond.
Usage Notes:
- Not suitable for expanded polystyrene.
- Ensure sufficient pressure is applied for maximum performance.
- Do not use near open flames, adhesive contains flammable solvents.
- Avoid skin and eye contact; use PPE.
Specifications
Container: Cartridge
Contents: 380 ml (380 g)
Chemical Basis: SBR adhesive with butanone solvent
Colour: Beige
Processing Temperature: +15 °C to +20 °C
Shelf Life: 12 months (stored at +15 °C to +20 °C in dry conditions)