Würth 1-Component Liquid Plastic Easy
Würth 1-Component Liquid Plastic Easy
24 in stock
Key Features
- Fibre-reinforced, single-component liquid plastic - immediately ready to use without mixing.
- Eliminates the need for a fleece inlay, enabling fast and safe application even in difficult areas.
- Solvent- and isocyanate-free, environmentally friendly, and EC1 Plus low-emission certified.
- Partial use possible - remaining product can be stored and reused without disposal.
- Durable and elastic - UV, alkali- and hydrolysis-resistant for long-lasting protection.
- Rainproof after approx. 60 minutes at 20°C.
- Highly flexible, with crack-bridging up to 5mm.
- High storage stability ensures reliable performance during the product's shelf life.
Couldn't load pickup availability
Share
Description
Specialised Waterproofing for Complex Details
Würth 1C Liquid Plastic Easy is a polyurethane-based, fibre-reinforced liquid sealing system designed for areas where conventional fleece-reinforced waterproofing systems are difficult or impossible to apply. By eliminating the need for fleece inlay, the product allows rapid, safe, and efficient processing - particularly suitable for corners, penetrations, terminations, and irregular details.
Reliable and Durable
The formulation provides high elasticity with up to 5mm crack-bridging capacity, ensuring reliable sealing even on substrates exposed to movement or stress. Its resistance to UV, alkalis, and hydrolysis ensures long-term durability in demanding environments.
Environmentally Friendly and Easy to Apply
As a solvent- and isocyanate-free system with EC1 Plus certification, Liquid Plastic Easy is safe to use in odour-sensitive environments and contributes to healthier working conditions. Partial usage is possible, reducing waste and lowering overall project costs.
Special Use Consideration
This product is classified as a special solution and does not comply with recognised technical regulations. Use must therefore be agreed with the building owner or architect beforehand, preferably in writing.
More Information
Application Instructions
- Ensure substrate is clean, dry, grease-free, and oil-free. Residual moisture on mineral substrates is acceptable.
- Mask off surrounding areas prior to application.
- Apply material with a roller or brush in one step, ensuring full coverage at 3 kg/m^2.
- Application temperature must be between 5°C and 35°C.
- Allow to cure. Rainproof after approx. 60 min at 20°C. Fully cured after 24h.
Usage Notes
- Humidity should not be below 30% during application.
- Must not be used as a replacement for systems requiring fleece reinforcement.
- Always obtain approval from building owners/architects prior to use.
- Do not apply in conditions of standing water or where continuous moisture exposure is expected.
Specifications
Chemical Basis: Polyurethane
Colour: Grey
Consistency: Fibre-reinforced liquid
Density: 1.25 g/cm³
Consumption: 3 kg/m² (single step)
Crack Bridging: Up to 5 mm
Processing Temperature: +5 °C to +35 °C
Rainproof After: ~60 min at +20 °C
Fully Cured: ~24 h (at +20 °C)
Temperature Resistance: - up to +80 °C
Container: Bucket
Contents: 7 kg
Shelf Life: 12 months (store at +10 °C to +30 °C)
Solvent-Free: Yes
Certifications: EC1 Plus (low-emission)