Presta VOC Fast Wax

Shake the bottle well. Mix the wax thoroughly by shaking vigorously for 15–20 seconds; product separates quickly and requires shaking before and during use.

Ensure the surface is clean and dry. Wash and dry the vehicle thoroughly; any remaining water or contamination reduces wax adhesion and finish quality.

Choose application conditions. Although Presta Fast Wax applies in direct sunlight, cool shaded conditions are still recommended for optimal working time and finish quality. However, direct sunlight application is possible if necessary.

Apply wax to the applicator pad. Dispense a small amount of wax onto a quality wax applicator pad—do not apply directly to the paint surface.

Apply wax in thin, even coats. Using the pad, apply the wax in thin layers across the paint surface, working in small sections (approximately 60 cm × 60 cm).

Allow the wax to dry to a haze. Once applied, let the wax begin to cure and develop a haze—this typically takes 3–5 minutes depending on temperature and humidity.

Wipe away the haze with a clean cloth. Using a clean, dry microfibre cloth or detailing towel, buff away the haze with firm pressure and straight-line or circular motions.

Treat the entire vehicle progressively. Work systematically across the entire vehicle, treating one section at a time and wiping each section's haze before moving to the adjacent area.

Re-shake before continuing. As you work, the wax separates—shake the bottle again before applying to subsequent sections to maintain consistent performance.

Final inspection and buffing. Once all sections are complete, perform a final inspection under bright light and buff any remaining residue to achieve maximum gloss.

Allow cure time before exposure. Once waxing is complete, allow 2–4 hours curing time before exposing the vehicle to water or weather; full protection develops after this cure period.

Product Type VOC-compliant breathable paste wax

Format Liquid in container

Container Size 1 litre

Formulation Premium natural and synthetic ingredients

Shine Profile Brilliant high-gloss finish

Protection Duration 30–60 days depending on climate and driving conditions

Application Speed Entire vehicle in approximately 45 minutes

Application Method Wax pad application, haze development, cloth buffing

Breathability Allows paint solvents to escape—compatible with 24-hour-old paint and clear coats

Direct Sunlight Application Yes—wax applies in direct sunlight and on hot surfaces

VOC Compliance Fully compliant with environmental VOC regulations

Temperature Stability Performs effectively across typical application temperature ranges

Shake Requirement Must shake before use and during application to maintain consistency

Film Type Thin breathable film reducing buffing effort

Work Time 3–5 minutes per section before haze development

Cure Time 2–4 hours full cure before water exposure

Suitable Surfaces Automotive and marine paint finishes

Application Technique Section-by-section haze development and wipe-off

Residue Profile Buffs clean without heavy residue

HS Code 3405.20

Documents not available for this product.