CRC
CRC Chain Lube Pro
CRC Chain Lube Pro
Low stock: 6 left
Key Features
- Resists hot and cold water wash-off.
- Resists high rpm sling-off.
- Reduces friction and wear.
- Reduces noise and vibration.
- Extends chain life.
- O-ring compatible.
- Harmless to metals and most plastics and rubbers. (Test before use)
- Does not contain chlorinated solvents.
Share
Product Information
Detailed Product Information
Water resistant adhesive chain lubricant.
A specially formulated blend of high quality mineral and synthetic oils, anti-oxidation, and anti-wear additives, friction modifiers and tackiness agents.
Chain Lube Pro penetrates into vital chain pin and bushing areas, then sets to form an adhering, long-lasting lubricant film.
Designed even for highly loaded fast running chains used in corrosive, high-power, and shock-load conditions.
Specifications
Appearance
Clear, blue liquid.
Specific Gravity at 20°C
0.80
Flash Point (solvent, close cup)
< 0°C
Kinematic Viscosity at 40°C
680mm²/s
Viscosity Index
111
Flash Point (Open Cup)
236°C
Pour Point
-12°C
Brugger Wear Test
50N/mm²
Max Temperature
150°C (180°C intermittent)
Humidity Cabinet Corrosion Resistance (50°C, 100% RH)
20 d
Documents
Application Instructions
Do not mix with other lubricants. Clean parts to be lubricated, and allow to dry.
Apply evenly onto the chain, wire rope, etc. and allow the product to penetrate and set for a few minutes.
Do not energise or start high speed/high load equipment before product has penetrated.
Excess or spilled product can be removed with a clean, lint-free cloth dosed with CRC Power Clean Pro.
Do no use on energised equipment.
E