CRC
CRC Adhesive Lubricant
CRC Adhesive Lubricant
Low stock: 3 left
Couldn't load pickup availability
Key Features
- Resists hot and cold water wash-off.
- Resists high rpm sling-off.
- Reduces friction and wear.
- Reduces noise and vibration.
- Extends chain life.
- O-ring compatible.
- Harmless to metals and most plastics and rubbers (test before using on stressed plastic parts).
- Does not contain chlorinated solvents.
- Aerosol formula uses hydrocarbon propellant and is provided with an extension tube for precise, controlled application and film thickness.
Share
Product Information
Detailed Product Information
Water resistant, adhesive chain lubricant.
A specially formulated blend of high quality mineral and synthetic oils, anti-oxidation and antiwear additives, friction modifiers and tackiness agents.
Adhesive Lubricant penetrates deeply
into vital chain pin and bushing areas, then sets to form an adhering, long lasting lubricant
film.
Designed even for highly loaded fast running chains used in corrosive, high power and
shock load conditions.
Specifications
Appearance
Clear, blue liquid
Specific gravity (@ 20°C)
0,800
Flash point (solvent, closed cup)
< 0 °C
Specific gravity (@ 20°C)
0.91
Kinematic viscosity (@ 40°C)
680 mm2/s.
Viscosity index
111
Flash point (open cup)
236°C
Pour point
-12°C
Max. temperature (*)
150°C
180°C (intermittent)
Humidity cabinet corrosion resistance
20 d
Documents
Application Instructions
Do not mix with other lubricants. Clean parts to be lubricated with CRC Fast Dry
Degreaser or CRC Industrial Degreaser and let dry.
Apply evenly onto the chain, wire rope, etc. and allow product to penetrate and set for a
few minutes.
Do not energise or start high speed/high load equipment before product has penetrated.
Excess or spilled product can be removed with CRC Fast Dry Degreaser or CRC Industrial
Degreaser.
Do not use on energised equipmen