CarPro Velvet Orange Peeling Pad

CARPRO light to medium to Orange Peel Removal Pad: Equivalent to 3000 grit Sandpaper

With our CARPRO Velvet and Denim Orange Peel Removal pads you can now remove or substantially reduce orange peel in the top layer without sanding. While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the steps needed afterwards.

PLEASE NOTE: THESE PADS ARE DECEPTIVE IN THEIR AGGRESSIVENESS. They don't dull the paint like sanding, so it may appear you aren't removing paint but you are. You must test these on a test panel first and learn how to use them first. Use LITTLE TO NO PRESSURE and observe the paint temperature often. DO NOT USE WITHOUT UTILIZING A PAINT GAUGE OFTEN.

Size

135mm

Quantity

1

Attach to hook & loop backing plate on a Rotary polisher

Prime pad with CarPro Fixer

Apply a few drops to paint or pad according to your skills and preference

Work a 2' x 2' section or larger to keep heat down as needed but remember the larger the area the more time it will take to level orange peel and defects.

Begin working polish on low speed for a pass or so.

Step up speed to approx. 1200 rpm (adjust as needed)

With proper lighting observe the level of orange peel removal while you work

Apply more polish if needed or a spray of water on pad to re-activate lubricants

When satisfied with orange peel and defect removal slow speed, ending at 600 rpm as you finish down the polish

Refine finish with a foam pad or microfiber pad and polish