CarPro Spotless Water Spot Remover

For Paintwork:

1. Wash the vehicle with Reset, rinse, and dry the paint. Begin with a clean surface to ensure Spotless targets only mineral deposits.
2. Work indoors or in the shade on cool panels; prepare 2 damp Terry Weave Towels. Avoid direct sunlight and hot surfaces, which can cause uneven drying and chemical evaporation.
3. Spray Spotless 2.0 directly onto the panel or into 1 damp Terry Weave Towel and spread on the affected area. Apply generously to ensure adequate coverage of mineral deposits.
4. Allow 30 seconds to 1 minute for Spotless 2.0 to break down the minerals on the surface before wiping the affected area to help loosen the mineral deposits. The dwell time allows the acid to chemically dissolve mineral bonds.
5. Do not let the chemical dry on the surface; wipe off with a 2nd damp Terry Weave Towel or apply Spotless 2.0 again. Extended drying can prevent complete removal and leave residue.
6. Repeat if necessary. Stubborn mineral deposits may require multiple applications.
7. After cleaning each panel, thoroughly rinse the panel with running water and dry before moving to the next panel. Remove all acid residue to prevent surface damage.

For Emblems and Wheels:

1. Clean the area with Reset, rinse, and dry the surface. Ensure a clean base for Spotless application.
2. Always test in an inconspicuous area first. Spot-test on hidden sections to confirm compatibility before treating visible areas.
3. Spray Spotless 2.0 onto an applicator, microfibre, or brush of your choice and apply to the affected area one section at a time. Use controlled application to prevent overspray onto adjacent surfaces.
4. Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without letting it dry before agitating to help break up the mineral deposits or stains. Gentle agitation helps loosen stubborn deposits.
5. Repeat if necessary. Multiple applications may be needed for heavy contamination.
6. Rinse thoroughly with running water after cleaning each area and dry. Remove all acid residue completely.

For Textured Plastics:

1. Clean the plastics with Reset, rinse, and dry. Begin with a clean surface.
2. Spray Spotless 2.0 directly on the textured plastic or apply to a damp microfibre towel and wipe it onto the surface generously to allow it to get into the pores. Ensure adequate saturation of the textured surface.
3. Allow Spotless 2.0 30 seconds to 1 minute to break down the mineral deposits and contamination before using a detailing brush to agitate and work the contamination out of the pores. Brush agitation helps the acid reach trapped particles.
4. Repeat if necessary. Heavily contaminated textured plastics may require multiple cycles.
5. Rinse thoroughly with running water after each section and dry. Complete removal of acid residue is essential.

For Glass:

1. Apply Spotless 2.0 onto a Terry Weave Towel and spread on glass, allowing to dwell for 30 seconds to 1 minute. Towel application prevents direct spray contact, which is not recommended for glass.
2. Use the same Terry Weave Towel to polish the glass to agitate the minerals, or for stubborn water spots apply some Spotless 2.0 to a polishing pad and polish the glass by machine or by hand. Gentle polishing action helps remove loosened deposits.
3. After spot removal, thoroughly rinse the glass and adjacent panels with running water or wash with car shampoo and dry. Complete rinsing prevents residue and ensures clarity.

Safety and Warnings

• Do NOT use in direct sunlight or on hot surfaces
• Do NOT spray directly on glass—use towel or brush application
• Use with caution on glass; buff in and off instantly and neutralise
• May affect windscreen/window coatings and traditional sealants and waxes
• Always test on inconspicuous areas before treating visible surfaces

Product Type Acid-based water spot and mineral deposit remover

Formula Generation 2.0—upgraded with stronger acids

Active Chemistry Proprietary balanced acid blend

Dwell Time 30 seconds to 1 minute

Application Method Spray, towel application, or brush application (depends on surface)

Primary Targets Water spots, mineral deposits, hard water stains

Paintwork Compatibility All automotive clear-coat finishes

CQuartz Coating Safe Yes—compatible with ceramic coating systems

Matte Paint Safe Yes—designed for matte finish compatibility

Surface Compatibility Paintwork, glass, wheels, emblems, textured plastics

Application Conditions Indoors or shade; cool surfaces; avoid direct sunlight

Residue Profile Minimal when rinsed thoroughly

Post-Application Rinse Required—thorough rinsing essential

HS Code 3405.10

• Safety Data Sheet