CARPRO ClearCut provides exceptional cut in very little time whilst creating a minuscule amount of dust.
While its cutting capabilities are extraordinary, the finish can also surprise you. With the capability of removing scratches as deep as P1000 CARPRO ClearCut is the perfect tool for a 2-step job on any paint or even 1-step on many med-to-hard paintworks.
More Information
Application Instructions
For Dual Action use:
Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
Spread product across section
Raise speed to HIGH speed with LOW pressure
Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
Increase pressure with each pass, finishing down with heavier pressure
When scratches are gone or polish has been worked through, wipe clean with microfiber towel
Clean pad
Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.
For Rotary Use
Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
Spread product across section
Keep polisher on low speed with LOW pressure
Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
Increase pressure with each pass, finishing down again with low pressure
When scratches are gone or polish has been worked through, wipe clean with microfiber towel
Clean pad
Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.
Specifications
Documents
Choosing a selection results in a full page refresh.
