ZG-90 zinc phosphate enhanced paints, which prime and top-coat in one application. Provides a superior combination of good drying time, great coverage, and solid opacity.
Demonstrates superior corrosion protection (meets ISO 12944-2, cat. C3, tested to ASTM B117) and adhesion (tested to ISO 2409:0).
The paints are RAL matched for accurate and consistent colour reproduction with a long-lasting satin finish.
More Information
Application Instructions
Use in well ventilated area.
Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry, and free from grease.
ZG-90 contains solids which settle during storage. Aerosol: shake the can vigorously until the agitator ball is free and continue shaking for a further minute. Tin: carefully stir the paint until solvent and solids are thoroughly mixed.
Shake/stir periodically during application.
Apply in light, even coats, from 15 - 20 cm away - best results are obtained with 2 - 3 light coats rather than one heavy coat.
Additional coats can be applied after 15 - 20 minutes.
When finished, clear the aerosol valve by briefly spraying the can upside down. When using the tin, firmly reseal it. Clean brushes with White Spirit.
