Action Can SA-90 Contact Spray Adhesive

SA-90 heavy-duty multipurpose contact spray adhesive is a superior adhesive with flexible repositioning capability, providing right first time results.

Delivers a powerful, permanent bond with a very smooth and professional appearance. The aerosol ensures easy application with an adjustable spray pattern to help minimise overspray.

Highly economical.

Appearance

Pale yellow, adhesive film

Odour

Ketone solvent

Specific Gravity at 20°C

0.8

Solubility

Insoluble in water

Coverage

3 - 5 m2

• Technical Data Sheet
• Safety Data Sheet

• Surfaces to be bonded must be clean, dry, and free from grease, dust, paint, polish, and loose material.
• Shake the can well before use. SA-90 should be applied directly from the can onto both surfaces to be bonded.
• Spray from a distance of approximately 15cm covering both surfaces with an even coating.
• Allow the adhesive to dry slightly. This will take approximately 3 to 4 minutes at normal room temperature (the drying time will be longer at lower temperatures).
• When the surfaces are tack dry, press them together with firm, even pressure.
• Very porous surfaces may require two coats of adhesive and drying time may be longer.
• After use, invert the can and spray a small amount of product to clear the nozzle.
• Store the product in a dry place at between 5°C and 25°C.