Action Can MZ-90 Maximum Zinc Coating

MZ-90 is an enhanced maximum zinc formulation that delivers a light grey matte finish with excellent protection against rust. The optimum blend of high purity zinc (>99%) with a specialist resin package provides outstanding anti-corrosion performance with strong adhesion to metal substrates. Provides cathodic anti-corrosion protection that meets ISO 1461:1999 standards.

Can be welded through and used as a primer or topcoat. Touch-dry in 40 minutes. Forms a hard, flexible film that actively resists flaking, cracking, peeling, and damage.

Appearance

Smooth, matte grey finish

Odour

Solvent

Specific Gravity at 20°C

1.45

Curing Time

90% cured after 7 days @ 23°C

Purity of Zinc Pigment

>99%

Zinc Content in Cured Film

>80%

Heat Resistance (4 hours)

200°C

Low Temperature Resistance

-30°C

Salt Spray Resistance (ASTM B117)

350 hours (40 µm film thickness)

• Technical Data Sheet
• Safety Data Sheet

• Use in a well ventilated area.
• Ensure that the surface to be coated is clean, dry, and free from grease.
• Remove any rust and scale with a wire brush.
• MZ-90 contains solids which settle during storage: shake the can vigorously until the agitator ball is free and continue shaking for a further minute.
• Shake the can periodically during application.
• Apply in light, even coats - best results are obtained with 2-3 light coats rather than one heavy coat.
• Additional coats can be applied after 15 - 20 minutes.
• When spraying is finished, clean the aerosol valve by turning the can upside down, and spray until only propellant escapes.