3M Scotch 1600 Anti Corrosion Spray

Prepare the surface for coating. Remove loose rust, corrosion, and debris through wire brushing or light abrasion; dry completely to ensure adhesion.

Ensure adequate ventilation. Work in well-ventilated areas or outdoors; the aerosol produces vapours requiring air circulation.

Shake the canister vigorously. Mix the rubber-asphalt formulation thoroughly by shaking for 15–20 seconds to ensure uniform consistency.

Apply even, continuous coating. Spray the anti-corrosion coating directly onto the surface from approximately 15–20 cm distance, maintaining even pressure and motion.

Build protective layer thickness. Apply sufficient coating to create a dense, continuous barrier—typically one application is sufficient, but heavy corrosion protection may benefit from multiple light coats.

Maintain consistent spray pattern. Use smooth, overlapping passes to ensure even coverage without gaps or thin areas.

Cover all vulnerable surfaces. Ensure complete coverage of all surfaces requiring protection—incomplete coverage defeats the protective purpose.

Allow coating to cure. Once application is complete, allow the rubber-asphalt coating to cure fully (typically 24 hours) before exposing to water or normal service conditions.

Inspect for complete coverage. Check the coated surfaces under bright light to confirm complete, even coverage without bare spots or thin areas.

Avoid excess application. Thick application does not improve protection and wastes material—consistent, even coverage is optimal.

Reapply periodically. For critical protection or high-exposure areas, inspect annually and reapply coating if degradation is evident.

Product Type Rubber-asphalt anti-corrosion protective spray coating

Format Aerosol spray canister

Container Size 400 mL (13.52 fl oz)

Chemical Base Modified styrene-butadiene rubber (SBR)

Product Colour Black

Application Method Spray from 15–20 cm distance

Coating Type Dense rubber-asphalt barrier

Corrosion Protection Target Moisture, saltwater spray, corrosive agents

Impact Resistance Abrasion and physical impact resistant

Operating Temperature Range To 80°C maximum

Adhesion Profile Bonds firmly to clean metal and vulnerable surfaces

Barrier Thickness Dense protective layer from single or multiple coats

Cure Time 24 hours for full protection development

Hydrophobic Properties Repels moisture and saltwater spray

Environmental Exposure Suitability Marine, saltwater, high-moisture environments

Application Areas Undercarriage, metal components, exposed surfaces, suspension parts, fasteners

Temperature Stability Maintains properties in hot environments up to 80°C

UV Stability Resistant to UV degradation in outdoor environments

Flexibility Elastomeric formulation flexes under impact without cracking

Ratio by Volume Ready-to-use—no mixing required

Storage Temperature 10–27°C with <75% relative humidity

Shelf Life 2 years with proper storage

Specifications Met RoHS 2011/65/EU compliance

Not Approved For Potable water applications

HS Code 3405.30

• Safety Data Sheet