• Degrease the surface using 3M™ VHB Surface Cleaner 08986 to remove any oil or
grease on surface
• Grind the surface of the actual damage using a Scotch-Brite™ Roloc™ Disc tapering
about 3 to 4 cm around the actual damage.
• Prepare the area around the tear with 3M™ Cubitron™ II Abrasives 220+/240+ and
clean with 3M™ VHB Surface Cleaner 08986.
• Apply one coat of 3M™ 05917 / 05917TF Polyolefin adhesion promoter over the
sanded surface and allow to dry for 10 minutes.
• Complete the next step in the repair process following 3M Plastic Repair SOP’s