3M Marine Clear Plastic Restorer

Hand Application:

1. Clean the plastic surface thoroughly. Wash with mild soap and water to remove salt spray, dirt, and contamination; dry completely.
2. Test in inconspicuous area. Apply a small amount to a hidden section of tinted plastic and allow to dry, checking for any discolouration or damage before proceeding.
3. Apply restorer to a soft cloth. Dispense a small amount onto a clean, soft microfibre cloth—avoid applying directly to the plastic surface.
4. Rub using short, controlled strokes. Using light to moderate pressure, rub the restorer across the plastic with short strokes in one direction.
5. Keep turning the cloth frequently. Rotate to fresh cloth sections as material is applied and contamination is picked up, preventing residue redeposition.
6. Apply additional material as needed. Continue working the restorer across the plastic surface, applying additional small amounts as the cloth dries.
7. Buff to high gloss. Once the surface appears hazy (indicating cure beginning), use a clean, soft cloth to buff the area with firm pressure to achieve high gloss.
8. Do not allow to haze between buffing. Continuous buffing prevents haziness—stop and re-buff if the surface begins to haze between applications.
9. Inspect the restored surface. Check under bright light to confirm clarity is restored and the finish is smooth without residue or streaks.
10. Repeat if necessary. For heavily hazed or scratched plastics, repeat the application and buffing process for enhanced restoration.

Machine Application:

1. Prepare the plastic surface. Wash thoroughly and dry completely; test tinted plastics in inconspicuous areas first.
2. Set buffer to appropriate speed. Use an air or electric buffer set to 1500–2500 RPM—stay within this range to avoid plastic damage from excessive speed.
3. Apply restorer to buffing pad. Dispense sufficient material onto a quality buffing pad to work approximately 60 cm × 60 cm area.
4. Spread material before starting machine. Using the pad manually, spread the restorer evenly across the work area to reduce sling and simplify cleanup.
5. Start the machine at low speed. Engage the buffer at low speed initially to ensure even material distribution.
6. Buff using consistent uniform pattern. Work the buffer across the surface using overlapping passes in a methodical pattern, maintaining even speed and pressure.
7. Apply light to medium pressure. Keep pressure moderate—excessive downward force can damage plastic or cause overheating.
8. Reduce pressure as material dries. As the restorer begins to cure and the surface appears glossy, reduce pressure to prevent scorching.
9. Inspect during application. Periodically stop and inspect the surface to assess clarity restoration and ensure even results.
10. Repeat if necessary. For heavily degraded plastics, additional passes may be required to achieve full clarity restoration.
11. Final inspection and cleanup. Once buffing is complete, inspect under bright light and clean away any residue or overspray.

Product Type Marine clear plastic polish and restorer

Format Bottle

Container Size 250 mL

Primary Function Fine scratch and haziness removal from marine plastics

Plastic Compatibility Clear and most tinted marine plastics

Application Method Hand buffing or machine polishing (1500–2500 RPM)

Recommended Buffer Speed 1500–2500 RPM for machine application

Recommended Pad Type Quality buffing pad for machine application

Contamination Targets Fine scratches, water spots, oxidation, salt spray haziness, crazing

Marine Environment Specific Formulated for saltwater and extreme weather exposure

Machine Application Recommended for polycarbonate plastic

Hand Application Suitable for all plastic types and precision work

Work Area Size Machine application: 60 cm × 60 cm per application round; hand application: smaller controlled areas

Cure Profile Rapid cure allowing buffing within application session

Final Appearance High gloss, crystal-clear transparency

Surface Compatibility Marine windscreens, hatches, cabin plastics, portlights

Tinted Plastic Testing Always test inconspicuous area before full application

HS Code 3405.30

Documents not available for this product.