LD-90 Gas Leak Detector 500ml
LD-90 Gas Leak Detector 500ml

LD-90 Gas Leak Detector 500ml

ld-90-500

by Action Can

MPN: 1930

£11.99

in stock
Add to Basket
Add to Wishlist

LD-90 is a water-based non-flammable professional grade gas leak detector formulated without solvents, silicones, or oils, which quickly and safely identifies gas and air leaks in pipework, valves, and other fittings.


LD-90 highlights non-visible leakes even on low pressure systems by forming highly visible bubbles.


Suitable for use by heating engineers to check that gas pipes are sealed, and there are no appearances of leaks.



  • Economical gas leak detector used on all types of gases (including O2).

  • Highlights leaks even on low-pressure systems.

  • Non-flammable, water-based formula.

  • Conforms to BS EN 14291:2004 (VOSA MOT Testing) and MIL-L-25567 (oxygen system compatibility).

  • Does not contain solvents, silicone or oils.


Applications


For maintenance and safety checks on gas pipework, air lines, joints, valves, gas cylinders, regulators, air brakes and inflatable equipment.


Directions for Use



  1. Testing of oxygen systems must be done carefully and product residues should not be allowed to build up: after using LD-90 the tested joint should be washed with clean water to ensure the removal of any residual solution.

  2. Pressurised container: May burst if heated.

  3. Keep out of reach of children.

  4. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray onto an open flame or other ignition source.

  5. Do not pierce or burn, even after use.

  6. Wear eye protection/face protection. If eye irritation persists, seek medical attention.

  7. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

  8. Dispose of contents/container to authorised waste collection point.

  9. Contains: 1, 2-benzisotiazol-3(2H)-one.

  10. May produce an allergic reaction.


  • Economical gas leak detector used on all types of gases (including O2).

  • Highlights leaks even on low-pressure systems.

  • Non-flammable, water-based formula.

  • Conforms to BS EN 14291:2004 (VOSA MOT Testing) and MIL-L-25567 (oxygen sytem compatibility).

  • Does not contain solvents, silicone or oils.